Akrilik Astar

Used on exterior, mineral-based and absorbent surfaces to improve topcoat adhesion, reduce paint consumption and achieve a homogeneous surface

Applied to all clean and dry prepared exterior surfaces, and to slippery substrates where a keyed surface is desired

The surface must be cleaned of all dust, dirt and oil. Surface defects and cracks are repaired with Silkcoat Exterior Putty and sanded to obtain a clean, dry and sound surface. Dilute Silkcoat Acrylic Primer 30-40% with clean water and apply in a single coat. It can be applied by roller, brush or spray. During application and drying, ambient and surface temperatures should be between +5°C and +30°C; do not apply in rainy weather

S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

Can be stored for a minimum of 2 years in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened