Stone Guard

Reducing capillary absorption in buildings while allowing the structure to breathe, Stone Guard is highly resistant to alkali. As a water repellent, it remains stable when diluted. It penetrates the surface very well and improves paint adhesion. It penetrates mineral surfaces, bricks and plasters, providing excellent protection; it is applied as a final protective coat. Being water-based, it is harmless to human health and the environment

Applied on all kinds of natural stone, mineral surfaces, coatings and paints

Dilute 1:7 for natural stone and mineral surfaces, and 1:11 for coating-group surfaces, applying in a single coat. On newly plastered surfaces, wait at least 28 days. Mix until homogeneous before use. During application and drying, ambient and surface temperatures should be between +5°C and +35°C. Very glossy, glassy surfaces should be sanded first

S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

Can be stored for a minimum of 2 years in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened