Acrylic Primer
DESCRIPTIONAcrylic copolymer binder based, water based, grained, white primer coating.
CHARACTERISTIC: Primer used on mineral-based and absorbent surfaces, in topcoats to provide adhesiveness to the paint, to reduce the paint consumption and to obtain a homogeneous surface.
APPLICATION SURFACES: Can be applied on all kinds of exterior and interior prepared surfaces to obtain a jagged surface.
TECHNICAL INFORMATION:
Structure: Styrene Acrylic
Consumption: Single coat: 12- 14 (m²/lt), 110-140 (g/m2)
Thinning Ratio: 15-20%
Recommended Primer: Silkcoat Acrylic Exterior Putty.
Application tools: Brush, Roller.
Drying: After 4- 12 hours depending on weather conditions.
Viscosity: 115 KU ±10 (23 º C)
pH: 8-9
Density: 1,61 ± 0,05 (g/ml)
Amount of solid: ( 69 ± 2 ) %
Brilliance: at 85º 7 ± 3
Thickness of dry coat: ( 30 ± 5 ) micron
Thickness of wet coat: ( 70 ± 5 ) micron
APPLICATION:
The application surface should be free from all kinds of dust, dirt and oil. Surface defects and cracks are repaired with Silkcoat External Putty and smoothed to obtain a clean, dry and solid surface. Silkcoat Acrylic Primer is applied in a single layer by thinning with 30-40% of clean water. Silkcoat Acrylic Primer can be applied by roller, brush or spray. Ambient and surface temperature should be between + 5ºC and + 30ºC during application and product drying and should not be applied during rainy weather.
CAUTION:
Avoid getting eye and skin contact. In case wash with plenty of water.
Preserve in a tightly closed container.
Keep above the reach of children
Do not dump into sewer system.
STORAGE: Keep at a cool and clean place away from sun light. It can be stored unopened 1 year at room temperature.
PACKAGING: 15 lt – 2,5 lt PE bucket
