DESCRIPTION: Pure Acrylic binder based, color changing decorative interior paint.
CHARACTERISTIC: Due to its color-changing structure, Magico creates a highly dynamic space, creating color fluctuations depending on light and motion. It allows different pattern combinations as well as allowing different color combinations at the same time. It has a high degree of scraping ability. Its water-based structure does not harm human health and environment.
APPLICATION SURFACES: Magico can be applied on a wide range of interior old painted surfaces such as as concrete, plaster, black plaster, betopan, glass textured and paintable wallpaper.
Structure: Pure acrylic
Consumption: 6-8 m² / kg, 125-170 (g/m2)
Thinning Ratio: Ready-to-use.
Density: 1,03 ± 0,02 (g/ ml)
Drying: Touch dry: after 15-20 min, Dust repulsive: after 1 hour, Hard dry: after 24 hours
SURFACE PREPARATION: The application surface should be free from all kinds of dust, dirt and oil. A clean, dry and solid surface should be obtained after lightly smoothing the blistered and old painted surfaces. If the surface is not smooth, a smooth surface should be obtained with Silkcoat Dahili Acrylic Paste for Magico application. If the surface to be applied is flattened with gypsum plaster, Silkcoat İzolac should be used on the surface before Magico application, Silkcoat Universal Primer should be used on smooth old painted surfaces, dirty or synthetic painted surfaces, and Silkcoat Putty Primer should be used on surfaces with putty application. Once the primer application is dry, the floor is applied as two layers of Magico. Wait at least 2 hours between coats. Magico is applied to the area of 10 – 20 m2 with the aid of roller or brush and is then given a special effect hand tools (sponge, buffer etc.). In the same way, the other surfaces finish gradually. Tools should be cleaned immediately after application. Magico should be mixed until completely homogenous before use. Ambient and surface temperature should be between + 5ºC and + 35ºC during application and product drying. If applied on very bright and glassy surfaces, a solid surface should be formed by smoothing the surface first to ensure better adhesion.
CAUTION: -Avoid getting eye and skin contact. In case wash with plenty of water. -Preserve in a tightly closed container. -Keep above the reach of children -Do not dump into sewer system.
STORAGE: Keep at a cool and clean place away from sun light. İt can be stored unopened 1 year at room temperature.
PACKAGING: 10 Kg, 3 Kg, 1 Kg PE Bucket.