Product Description: Powder polymer based, healthy, colorable, decorative interior wall covering material.
Features: Smart Prestige Series Silk Plaster, which contributes to heat and sound insulation, is anti-static and dust-proof. In addition to its easy application, it does not harm human health and the environment due to its water-based structure. Odorless, can be inhaled.
Application Areas: Smart prestige silk plaster can be applied to fine plaster, gypsum plaster, gypsum board, wooden surfaces and non-alkaline surfaces. It is not applied to glass, brick, metal surfaces, exterior surfaces and wet floors.
Structure: Powder polymer
Consumption: 4 m²/bag
Thinning Ratio: For 1 sachet: 1 box of Natural Silk Lacquer+ 3 Kg water.
Drying Time: 24 hours
Application Thickness: 1 mm
Application: The surface to be applied must be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained. First of all, Smart Primer should be applied to newly plastered surfaces. On old painted, dirty, damp surfaces, paint, dirt, soot and similar residues on the surface are thoroughly cleaned. After the primer application has dried, silk plaster application can be started. Colorless Natural Silk Lacquer can be colored in the desired color from the Smart color chart. Then, approximately 3 Kg of water is added on the colored varnish and mixed until it reaches a homogeneous consistency. The material in the bag is added to the colored Natural Silk Lacquer/Water mixture and kneaded thoroughly. Depending on the climate and application conditions, some more water can be added if necessary. After the prepared material has rested for at least 20 minutes, it is applied to the surface with an average of 1 mm thickness using a plaster technique with the help of a plastic trowel. The surface should not be left unfinished during the application. After the application is over, the tools used should be cleaned with water immediately. Application can be done with a plastic trowel and spray gun. On freshly plastered surfaces, at least 28 days must be waited before applying paint to the surface. During the application and product drying period, the ambient and surface temperature should be between +5ºC and +35ºC.
Warnings: Keep the product in a tightly closed container. Do not pour into sewer.
Storage: It can be stored for at least 1 year in a cool, clean and dry environment, without being exposed to direct sunlight, without opening the product container.
Packaging: Bag/Natural Silk Lacquer. 1 Bag 600 G