Akrilik Astar

A water-based, granular white exterior primer based on an acrylic copolymer

Structure: Styrene Acrylic
Consumption: Single coat 12-14 m²/lt, 110-140 g/m²
Thinning Ratio: 15-20% (30-40% in application)

Verpackung

15 L and 2.5 L plastic buckets

Technische Daten

Structure

Styrene Acrylic

Consumption

Single coat 12-14 m²/lt, 110-140 g/m²

Thinning Ratio

15-20% (30-40% in application)

Suitable Putty

Silkcoat Acrylic Exterior Putty

Application Tools

Brush, roller

Drying Time

4-12 hours depending on air temperature

Viscosity

115 KU ± 10 (23ºC)

pH (25°C)

Density

1.61 ± 0.05 g/ml

Solid Content

69% ± 2

Eigenschaften

Used on exterior, mineral-based and absorbent surfaces to improve topcoat adhesion, reduce paint consumption and achieve a homogeneous surface

Anwendungsbereiche

Applied to all clean and dry prepared exterior surfaces, and to slippery substrates where a keyed surface is desired

Verarbeitungshinweise

The surface must be cleaned of all dust, dirt and oil. Surface defects and cracks are repaired with Silkcoat Exterior Putty and sanded to obtain a clean, dry and sound surface. Dilute Silkcoat Acrylic Primer 30-40% with clean water and apply in a single coat. It can be applied by roller, brush or spray. During application and drying, ambient and surface temperatures should be between +5°C and +30°C; do not apply in rainy weather

Sicherheitshinweise

S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

Lagerung

Can be stored for a minimum of 2 years in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened

Dokumente