Brüt Beton Astarı

The Exposed Concrete Primer is a special primer that creates a strong adhesion bridge on smooth, low-absorbency concrete surfaces, allowing materials such as plaster, gypsum, ceramic adhesive or paint to bond more firmly. It balances surface absorbency to reduce material consumption while preventing dusting, providing a clean and stable substrate before application. Available in water-based and solvent-based options, it can be used indoors and outdoors; its fast drying time and ease of application increase labor efficiency

Exposed concrete surfaces, ceilings and walls (interior and exterior), prefabricated concrete elements, screed surfaces, surfaces under gypsum and plaster, pool and water tank interiors, terrace and balcony floors, parking and basement walls, tunnel and viaduct surfaces

The surface must be cleaned of all dust, dirt and oil. Blistered and old painted surfaces are scraped; defects and cracks are filled with Silkcoat Acrylic Exterior Putty and sanded to obtain a clean, dry, sound surface. Silkcoat Exposed Concrete Primer is applied directly in a single coat by brush, roller or spray. Do not apply in very windy weather or under direct sunlight. Before the topcoat, wait at least 24 hours depending on air temperature and humidity

S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

Can be stored for a minimum of 2 years in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened