Silkosil

Healthy and environmentally friendly; does not crack, applies easily, has high covering ability and is breathable. Thanks to silicone technology it is easy to clean, has a silk-matte appearance, and its color does not fade for years

After surface preparation, it can be applied to a wide variety of interior surfaces such as old painted surfaces, concrete, plaster, cement board, wallpaper and glass textile

The surface must be cleaned of all dust, dirt and oil. After lightly sanding blistered and old painted surfaces, apply primer to obtain a clean, dry and sound surface. If needed, repair defects and cracks with Silkcoat Interior Acrylic Putty. Use Silkcoat Izolac on new and absorbent surfaces, Silkcoat Universal Primer on old painted, dirty or synthetic painted surfaces, and Silkcoat Putty Primer on puttied surfaces. Dilute Silkcoat Silkosil 10-15% with clean water and apply in 2 coats by roller, brush or spray. Wait at least 2 hours between coats. Clean tools immediately with water. On newly plastered surfaces, wait at least 28 days. Mix until homogeneous before use. During application and drying, ambient and surface temperatures should be between +5°C and +35°C. Very glossy and glassy surfaces should be sanded first

S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

Can be stored for a minimum of 2 years in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened