Betoncoat

With its stone-like texture, Betoncoat presents the nobility of aged stone walls in a modern and vibrant way. Thanks to its water-based structure, it is harmless to human health and the environment

Used on all properly prepared old painted interior surfaces such as concrete, plaster, rough plaster, and betopan

The surface must be cleaned and sanded. For the first coat, mix Betoncoat with 20–25% water and apply with a trowel, then allow it to dry for 1 day. For the second coat, apply to a surface moistened with water, create linear patterns, and allow it to dry. On the third day, moisten the surface again with water and apply Betoncoat, forming lines and allowing it to dry. On the same third day, moisten the surface once more and apply the final coat, Silkcoat Arteco, diluted by 25–30%. During application and drying, ambient and surface temperatures should be between +5°C and +35°C. For glossy surfaces, sanding is recommended to ensure better adhesion

S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

Can be stored for a minimum of 2 years in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened