Viabella

A next-generation, water-based, pure acrylic transformation paint with excellent adhesion to all surfaces

Drying Time: Touch dry: 1–2 hours; full cure: 24 hours. Surfaces should not be used for 1 day after application, and surfaces exposed to water should not be used for 2 days. During the first 7 days, standing water should be avoided and the surface should be protected from impacts
Coverage: 1 liter covers approximately 8–10 m² in two coats, depending on the application method and surface

Kemasan

1 L, 0.5 L, and 0.25 L plastic containers

1 / 2

Video Aplikasi

Paint All Surfaces with Viabella

Tonton aplikasi profesional produk ini langkah demi langkah.

Data Teknis

Drying Time

Touch dry: 1–2 hours; full cure: 24 hours. Surfaces should not be used for 1 day after application, and surfaces exposed to water should not be used for 2 days. During the first 7 days, standing water should be avoided and the surface should be protected from impacts

Coverage

1 liter covers approximately 8–10 m² in two coats, depending on the application method and surface

Fitur

Viabella has very high hiding power and excellent water resistance, providing waterproofing on the applied surface. It offers high chemical resistance (soap, cleaning detergents, diluted bleach, etc.). Thanks to its excellent flow, it leaves no roller or brush marks and allows sufficient working time for adjustments. The glossy finish achieved after application eliminates the need for an additional varnish coat. It has strong adhesion and does not require any primer. It is resistant to dirt and stains and can be easily cleaned with a wet, soapy cloth. It has no unpleasant odor and is suitable for both interior and exterior use

Area Aplikasi

Can be applied on all types of surfaces such as wood, furniture, parquet, laminate, ceramic, porcelain, tiles, marble, glass, plastic, metal, aluminum, galvanized surfaces, zinc, stone, walls, and wallpaper

Petunjuk Aplikasi

The surface to be applied must be clean and free from dust, dirt, oil, silicone, and any substances that may reduce adhesion. Sanding should be carried out when necessary. No primer is required before application. However, for corrosion prevention, it is recommended to prime metal surfaces with Silkcoat Anti Rust Primer. After opening the Viabella container, mix thoroughly until a homogeneous consistency is achieved. Apply the product undiluted to the prepared surface in two coats using a soft brush, velvet roller, or spray system. Allow at least 2 hours between coats. During application, ensure that the ambient and surface temperatures are between +5°C and +30°C

Peringatan Keselamatan

S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

Penyimpanan

2 years at room temperature in the original unopened packaging

Dokumen