Konten ini belum tersedia dalam bahasa Anda; ditampilkan dalam English.
Cam Cila
A single-component, colorless, glossy parquet varnish based on urethane alkyd
- Structure
- Urethane alkyd — Class 1 long oil varnish
- Consumption
- 10-14 m²/lt, 85-138 g/m²
- Thinning Ratio
- 10-15%

15 L, 2.5 L, and 0.75 L tin buckets
Extremely resistant to scratching and abrasion, with a hard yet elastic structure. On applied surfaces it shows superior resistance to substances such as alcohol, oil and detergent
Used safely on all wooden parts and parquet floors
Surfaces must be cleaned of dirt and oil; after scraping to prepare a dry, clean surface, prime with Cellulosic Filler Varnish. Gaps between parquet boards should be filled with a putty made of parquet varnish and sanding dust. Ready to use; when needed, dilute with synthetic thinner and apply 2-3 coats by brush. Wait 8-12 hours between coats
R10: Flammable. R51/53: Toxic to aquatic organisms; may cause long-term adverse effects in the aquatic environment. R65: Harmful — may cause lung damage if swallowed. R66: Repeated exposure may cause skin dryness and cracking. R67: Vapors may cause drowsiness and dizziness. S2: Keep out of reach of children. S16: Keep away from sources of ignition — no smoking. S24/25: Avoid contact with eyes and skin. S37: Wear suitable gloves. S51: Use only in well-ventilated areas. S62: If swallowed, do not induce vomiting; seek first aid immediately and show the container or label
Shelf life is a minimum of 1 year at room conditions
Lembar Data Teknis (TDS)
PDFLembar Data Keselamatan (MSDS)
PDF
Class Sentetik
A first-class, water-based, silky-matte interior topcoat with silicone additives, based on an acrylic copolymer binder
Lihat Produk
Class Primer Astar
A primer paint based on alkyd resin
Lihat Produk
Silkoten
A semi-matte satin topcoat paint based on synthetic alkyd resin
Lihat Produk
Lux Sentetik
A glossy topcoat paint based on alkyd resin
Lihat ProdukMari pilih produk yang tepat untuk proyek Anda
Tim teknis kami dapat memberi saran tentang jenis permukaan, kondisi aplikasi, dan daya sebar.











