Questo contenuto non è ancora disponibile nella tua lingua; visualizzato in English.

Exterior Paints & Primers

Akrilik Astar

A water-based, granular white exterior primer based on an acrylic copolymer

Structure: Styrene Acrylic
Consumption: Single coat 12-14 m²/lt, 110-140 g/m²
Thinning Ratio: 15-20% (30-40% in application)

Confezioni

15 L and 2.5 L plastic buckets

Dati tecnici

Structure

Styrene Acrylic

Consumption

Single coat 12-14 m²/lt, 110-140 g/m²

Thinning Ratio

15-20% (30-40% in application)

Suitable Putty

Silkcoat Acrylic Exterior Putty

Application Tools

Brush, roller

Drying Time

4-12 hours depending on air temperature

Viscosity

115 KU ± 10 (23ºC)

pH (25°C)

Density

1.61 ± 0.05 g/ml

Solid Content

69% ± 2

Caratteristiche

Used on exterior, mineral-based and absorbent surfaces to improve topcoat adhesion, reduce paint consumption and achieve a homogeneous surface

Campi di applicazione

Applied to all clean and dry prepared exterior surfaces, and to slippery substrates where a keyed surface is desired

Istruzioni di applicazione

The surface must be cleaned of all dust, dirt and oil. Surface defects and cracks are repaired with Silkcoat Exterior Putty and sanded to obtain a clean, dry and sound surface. Dilute Silkcoat Acrylic Primer 30-40% with clean water and apply in a single coat. It can be applied by roller, brush or spray. During application and drying, ambient and surface temperatures should be between +5°C and +30°C; do not apply in rainy weather

Avvertenze di sicurezza

S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

Conservazione

Can be stored for a minimum of 2 years in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened

Documenti