Silkofarit

With its matte appearance, Silkofarit gives the applied surface a grain-textured decorative look. It minimizes plaster and surface imperfections and is economical. Being water-based, it is harmless to human health and the environment

Prepared plaster, aerated concrete, puttied surfaces, prefabricated buildings, wooden chipboard and gypsum panel boards

The surface must be cleaned of all dust, dirt and oil. Blistered and old painted surfaces are scraped; surface defects and cracks are filled with Silkcoat Acrylic Putty and sanded to obtain a clean, dry, sound surface. Ready-to-use Silkofarit is applied by spraying with a spray gun. During application and drying, ambient and surface temperatures should be between +5°C and +35°C

S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

Can be stored for a minimum of 2 years in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened