Silkcoat
Silkcoat

このコンテンツはまだ日本語に対応していません。Englishで表示しています。

1 / 7

画像をクリックすると拡大します

Effect PaintsTravertine Stone Texture

Travertino

An antique stone decorative paint based on an acrylic copolymer and cement

Structure
Styrene Acrylic
Consumption
1–1.5 m²/lt, 1500–2500 g/m²
Density
1.95 ± 0.02 g/ml
Travertino — 荷姿
荷姿

25 Kg and 15 Kg plastic buckets

見積もりを依頼

1 / 7

施工動画

Travertino Application

製品のプロによる施工をステップごとにご覧ください。

技術データ
Structure
Styrene Acrylic
Consumption
1–1.5 m²/lt, 1500–2500 g/m²
Density
1.95 ± 0.02 g/ml
Thinning Ratio
Ready to use
Drying Time
Hard drying takes 1 day; when applied in two coats, the first coat dries in 24 hours
特長

Travertino offers a stone-like appearance, presenting an aged yet modern quality and vibrant stone wall effect. It also allows for various decorative pattern applications. Thanks to its water-based structure, it is harmless to human health and the environment

用途

Can be applied on all properly prepared painted interior surfaces such as concrete, plaster, rough plaster, and betopan

施工方法

The surface to be applied must be cleaned of all dust, dirt, and oil. After lightly sanding all blistered and old painted surfaces, obtain a clean, dry, and sound surface. If necessary, surface defects and cracks should be repaired with Silkcoat Interior Acrylic Putty. For the first coat, dilute Travertino with 20–25% water in a quantity sufficient for the surface and mix until homogeneous. Apply Travertino to the entire surface using a trowel. After leveling the surface with the trowel, allow the first coat to dry for 1 day. Before starting the second coat, moisten the surface with water using a roller. Once a dry surface is obtained, apply the second coat again with a trowel. As the second coat begins to set, create linear grooves on the surface using the reverse side of the trowel. After sufficient grooves are formed, smooth the surface again with the trowel and allow it to dry for another day. On the third day, moisten the surface again with water using a roller. Before full curing, apply the final coat, Silkcoat Arteco, diluted by 25–30%, using special application equipment. Travertino must be mixed thoroughly until completely homogeneous before use. Dilute only the amount of Travertino required for each coat, as the product is cement based and may set. During application and drying, ambient and surface temperatures should be between +5°C and +35°C. For very glossy or glassy surfaces, lightly sand the surface beforehand to create a sound substrate and improve adhesion

安全上の注意

S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

保管

Can be stored for a minimum of 2 years in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened

資料

技術データシート(TDS)

PDF

安全データシート(MSDS)

PDF

色見本

Travertino
お困りですか?

プロジェクトに最適な製品を一緒に選びましょう

下地の種類、施工条件、塗布量について、技術チームがアドバイスいたします。