Natural

With its satin, silk-matte appearance, Natural Satin offers high hiding power. Besides being wipeable, its colors stay vibrant for many years. Thanks to its water-based structure, it is harmless to human health and the environment

After surface preparation, it can be applied to a wide variety of interior surfaces such as old painted surfaces, concrete, plaster, cement board, paintable wallpaper and glass textile

The surface must be cleaned of all oil, dirt and dust. Blistered and old paints must be scraped off. The surface must be clean, dry and sound. Where necessary, fill holes and cracks with Silkcoat Interior Acrylic Putty. Apply Silkcoat Izolac to absorbent or previously unpainted surfaces, Silkcoat Universal Primer to old, synthetic painted or dirty surfaces, and Silkcoat Putty Primer to puttied surfaces. Dilute the paint 10-15% with clean water and apply in two coats by roller, brush or spray. Wait 2 hours between coats depending on weather conditions. Clean tools with water after application. On newly plastered surfaces, wait about 28 days. Mix the paint thoroughly until homogeneous. During application and drying, ambient and surface temperatures should be between +5 and +35 degrees. Glossy and glassy surfaces should be sanded before application for better adhesion

S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

Can be stored for a minimum of 2 years in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened