Pearl

Silkcoat Pearl is a pearl-textured interior wall coating that allows linear or curved pattern designs and offers high covering power. In addition to being washable, its water-based structure makes it harmless to human health and the environment

Can be applied on all properly prepared old painted interior surfaces such as concrete, plaster, rough plaster, betopan, glass textile surfaces, and paintable wallpaper

The application surface must be cleaned of all dust, dirt, and oil. After lightly sanding all blistered and old painted surfaces, obtain a clean, dry, and sound surface. If necessary, surface defects and cracks should be repaired with Silkcoat Interior Acrylic Putty. On new and absorbent surfaces, apply Silkcoat Izolac; on old painted, dirty, or synthetic painted surfaces, apply Silkcoat Universal Primer; on puttied surfaces, apply Silkcoat Putty Primer.Silkcoat Pearl is applied in a single coat without dilution using a glass trowel. Linear or curved patterns are created with the glass trowel during application. After application, tools should be cleaned with water. On newly plastered surfaces, wait at least 28 days before painting. Before use, the paint must be mixed thoroughly until completely homogeneous. During application and drying, ambient and surface temperatures should be between +5°C and +35°C. For very glossy or glassy surfaces, lightly sand the surface beforehand to create a sound substrate and ensure better adhesion

S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

Can be stored for a minimum of 2 years in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened