이 콘텐츠는 아직 한국어로 제공되지 않아 English(으)로 표시됩니다.
Akrilik Astar
A water-based, granular white exterior primer based on an acrylic copolymer
- Structure
- Styrene Acrylic
- Consumption
- Single coat 12-14 m²/lt, 110-140 g/m²
- Thinning Ratio
- 15-20% (30-40% in application)
15 L and 2.5 L plastic buckets
Used on exterior, mineral-based and absorbent surfaces to improve topcoat adhesion, reduce paint consumption and achieve a homogeneous surface
Applied to all clean and dry prepared exterior surfaces, and to slippery substrates where a keyed surface is desired
The surface must be cleaned of all dust, dirt and oil. Surface defects and cracks are repaired with Silkcoat Exterior Putty and sanded to obtain a clean, dry and sound surface. Dilute Silkcoat Acrylic Primer 30-40% with clean water and apply in a single coat. It can be applied by roller, brush or spray. During application and drying, ambient and surface temperatures should be between +5°C and +30°C; do not apply in rainy weather
S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains
Can be stored for a minimum of 2 years in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened
기술 데이터 시트(TDS)
PDF물질안전보건자료(MSDS)
PDF
Silicone
A first-class, water-based, matte exterior paint based on a pure acrylic binder
제품 보기
Acrylic
A first-class, water-based, matte exterior topcoat paint based on a pure acrylic binder
제품 보기
Elasticoat
A matte, elastic exterior paint based on a pure acrylic binder
제품 보기
Elasticoat Desenli
A matte, elastic textured exterior coating based on an acrylic copolymer binder
제품 보기