Ruloser Silikonlu

Thanks to its silicone base preventing water penetration into the building, Ruloser Silicone allows multiple decorative patterns. Besides being easy to apply, it covers plaster imperfections. Being water-based, it is harmless to human health and the environment

Used on concrete, concrete slabs, cement-based conventional plaster and similar surfaces

The surface must be cleaned of all dust, rust, dirt, oil and old paint residues. Blistered, loose and flaking paint is scraped off; cracks are repaired with Silkcoat Exterior Putty and sanded, then Silkcoat Acrylic Primer is applied to obtain a clean, dry and sound surface. Mix until homogeneous before use. Spread undiluted with a sheepskin roller in an even thickness; then, while wet, texture with a roller (sheepskin, coral, sponge) according to the desired pattern. For spray application, dilute with 8% water. During application and drying, ambient and surface temperatures should be between +5°C and +35°C. To avoid tone differences, use materials with the same production code and date together

S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

Can be stored for a minimum of 2 years in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened