Macun Astarı

An acrylic copolymer binder-based primer that creates a topcoat-ready surface after interior putty application

Structure: Styrene Acrylic
Consumption: Single coat 10-15 m²/lt, 65-100 g/m²
Thinning Ratio: 15-30%

15 L and 2.5 L plastic buckets

기술 데이터

Structure

Styrene Acrylic

Consumption

Single coat 10-15 m²/lt, 65-100 g/m²

Thinning Ratio

15-30%

Drying Time

Touch dry 15-20 min; dust-free 1 hour; full cure 24 hours

pH (25°C)

Solid Content

65% ± 2

Density

1.62 ± 0.02 g/ml

Dry/Wet Film Thickness

30±5 / 60±5 micron

It increases the hiding power of the topcoat and ensures good adhesion to the surface. On puttied surfaces, it creates a surface ready for topcoat application. By reducing surface absorbency, it minimizes paint consumption. Being water-based, it is harmless to human health and the environment

적용 분야

Used on interior surfaces where putty has been applied

시공 방법

The surface must be cleaned of all dust, dirt and oil. After the necessary cleaning, Silkcoat Putty Primer can be applied. Make sure the required drying time has passed after the putty application. Dilute Silkcoat Putty Primer 10-15% with clean water and apply in a single coat by roller, brush or spray. Clean tools immediately with water. Mix until homogeneous before use. Ambient and surface temperatures should be between +5°C and +35°C

안전 경고

S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

Can be stored for a minimum of 1 year in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened