Lux Tavan

Lux Tavan is a white ceiling paint with an extra-matte appearance and high hiding power. It integrates with the surface it is applied to and leaves no roller or brush marks. Being water-based, it is harmless to human health and the environment and is breathable

Can be applied to all prepared interior surfaces such as old painted surfaces, concrete, gypsum, rough plaster, betopan, glass textile and paintable wallpaper

The surface must be cleaned of all dust, dirt and oil. After lightly sanding blistered and old painted surfaces, apply primer to obtain a clean, dry and sound surface. If needed, repair defects and cracks with Silkcoat Interior Acrylic Putty. Use Silkcoat Izolac on new and absorbent surfaces, Silkcoat Universal Primer on old painted, dirty or synthetic painted surfaces, and Silkcoat Putty Primer on puttied surfaces. Dilute Silkcoat Lux Tavan 10-15% with clean water and apply in 2 coats by roller, brush or spray. Wait at least 2 hours between coats. Clean tools immediately with water. On newly plastered surfaces, wait at least 28 days. Mix until homogeneous before use. During application and drying, ambient and surface temperatures should be between +5°C and +35°C

S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

Can be stored for a minimum of 2 years in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened