Class Tavan

An economical, extra-matte ceiling primer paint based on an acrylic copolymer emulsion that leaves no roller or brush marks

Structure: Styrene Acrylic
Consumption: 6-10 m²/lt, 100-150 g/m²
Thinning Ratio: 10-15%

25 Kg, 17.5 Kg, 10 Kg, and 3 Kg plastic buckets

技術データ

Structure

Styrene Acrylic

Consumption

6-10 m²/lt, 100-150 g/m²

Thinning Ratio

10-15%

Suitable Primer

Silkcoat Universal Primer, Silkcoat Izolac

Application Tools

Brush, roller

Drying Time

2 hours

Viscosity

120 KU ± 10 (23ºC)

pH (25°C)

Density

1.75 ± 0.05 g/ml

Solid Content

63% ± 2

Dry/Wet Film Thickness

50±5 / 95±5 micron

One step ahead of paints in its category with its whiteness and economy, Class Tavan has very good adhesion and hiding properties, applies easily and leaves no brush marks. It is breathable and, being water-based, has no disturbing odor

Can be applied to all prepared ceiling surfaces

The surface must be cleaned of all dust, dirt and oil. After lightly sanding blistered and old painted surfaces, obtain a clean, dry and sound surface. If needed, repair defects and cracks with Silkcoat Interior Acrylic Putty. Apply Silkcoat Class Tavan after applying Silkcoat Izolac to new and absorbent surfaces. Dilute Silkcoat Class Tavan 10-15% with clean water and apply in two coats by roller, brush or spray. Wait at least 2 hours between coats. Mix until homogeneous before use. During application and drying, ambient and surface temperatures should be between +5°C and +35°C

安全上の注意

S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

Can be stored for a minimum of 2 years in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened