fbpx

Class Antipas

DESCRIPTION: Synthetic alkyd resin based, protective primer for metal surfaces

CHARACTERISTIC : prevents rust formation on metal surfaces by providing protection against dampness, salt water and external factors. It is an anticorrosive primer which can be safely used on metal surfaces with its fast drying, flexible structure and superior adhesion properties.

APPLICATION SURFACES: Can be applied on all kinds of interior and exterior metal surfaces.

TECHNICAL INFORMATION:

Structure: Synthetic alkyd resin

Consumption: 12-14 (m² / lt), 90-120 (g / m2)

Thinning ratio: 10-15%

Drying: Dust repulsive: 15 – 20 minutes; for stabilization of top coat application: 6 – 8 hours

Viscosity: 110 KU ± 10 (23 º C)

Density: 1,60 ± 0,05 (g / ml)

Amount of solid matter: (85 ± 2)%

Dry film thickness: 55 ± 5 microns

Wet film thickness: 75 ± 5 microns

APPLICATION: The application surface should be free from all kinds of dust, dirt and oil. Old paints and alien materials should be smoothed to obtain a clean, dry and solid surface. The sharp edges of the welding tips, edges should be trimmed and a smooth metal surface should be obtained. The material is applied with roller, brush or spray by thinning with synthetic tin. During the application, the temperature of the air should be between 5 – 40 º C and not exceed 85% of the humidity.

CAUTION:

R10 Flammable.

R51 / 53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

R65 Harmful: may cause lung damage if swallowed.

R66 Repeated exposure may cause skin dryness or cracking.

R67 Vapors may cause drowsiness and dizziness.

S2 Keep out of reach of children.

S16 Keep away from sources of ignition – No smoking.

S24 / 25 Avoid contact with eyes and skin.

S37 Wear suitable gloves.

S51 Use only in well-ventilated areas.

S57 Use a suitable container to avoid contamination.

S60 Dispose of this material and its container as hazardous waste.

S61 Avoid release to the environment. Refer to Special Instructions for Use / Safety Data Sheet.

S62 If swallowed, do not induce vomiting. Contact the first aid service immediately and show the container or label.

STORAGE:  Keep  at a cool and clean place away from sun light. İt can be stored  unopened 1 year  at room temperature.

PACKAGING: 17.5 kg,  3kg, 1kg tin bucket.