Acrylic Macun

DESCRIPTION: Acrylic Copolymer binder based, exterior putty.

CHARACTERISTIC:

Resistant against outside conditions with its special structure.

Cover plaster faults and easily appliable.

Minimum consumption, breathing ability, dry in short time.

Due to its streching ability, it covers the cracks and prevents them from reaching the finishing coat.

APPLICATION SURFACES:

Can be applied on surfaces such as conventional plaster ,concrete , asbestos plate ,gas concrete and similar.

TECHNICAL INFORMATION:

Structure : Stirene acrylic.

Consumption :500 – 1500 gr/m² depending on surface.

Thinning Ratio : No thinning, ready-to-use.

Application tools : Trowel , spatula.

Drying : After 1 – 4 hours depending on weather conditions.

Ph : 8 – 9

Density : 1,88 ± 0,05 ( g / ml )

Amount of solid : ( 73 ± 5 ) %

Thickness of dry coat: ( 350 ± 50 ) micron

Thickness of wet coat: ( 650 ± 50 )  micron

APPLICATION:

It should be applied without diluting on old and new surfaces.

For concrete surfaces, Acrylic Putty is mixed with 20% cement to form a smooth and solid surface.

Ambient and surface temperature should be between + 5ºC and + 30ºC during the application and product drying.

CAUTION:

S2: Keep out of the reach of children.

S24 / 25: Avoid contact with eyes and skin.

S46: If swallowed, seek medical advice immediately; Show the container or label.

Store the product in a tightly closed container.

Do not pour into the sewer.

STORAGE: Keep  at a cool and clean place away from sun light. İt can be stored  unopened 1 year  at room temperature.

PACKAGING: 25 Kg  5 Kg PE Bucket

Poz No: Y.25.004/13