Silkcoat
Silkcoat
1 / 8

Click an image to enlarge

Effect PaintsSoft Metallic Pearl

Metalico Soft

A decorative interior wall paint with pearlescent additives and pearl-like elegance, based on a pure acrylic emulsion binder

Structure
Pure Acrylic
Density
1.12 ± 0.02 g/ml
Consumption
10–16 m²/lt, 180–250 g/m²
Metalico Soft — Packaging
Packaging

10 Kg and 3 Kg plastic buckets

Request a Quote

1 / 3

Application Video

Metalico Soft

Watch the step-by-step professional application of the product.

Technical Data
Structure
Pure Acrylic
Density
1.12 ± 0.02 g/ml
Consumption
10–16 m²/lt, 180–250 g/m²
Thinning Ratio
Ready to use
Drying Time
Touch dry 15–20 min; dust-free after 1 hour; full cure after 24 hours
Features

Thanks to its pearlescent structure, Metalico Soft offers a bright, pearl-like and distinctive appearance and allows for various decorative pattern applications. In addition to its high covering power, it also features excellent scrub resistance. Its water-based structure makes it harmless to human health and the environment

Application Areas

Can be applied on all properly prepared old painted interior surfaces such as concrete, plaster, rough plaster, betopan, glass textile surfaces, and paintable wallpaper

Application Instructions

The surface to be applied must be free from all dust, dirt, and oil. After lightly sanding all blistered and old painted surfaces, obtain a clean, dry, and sound surface. If necessary, surface defects and cracks should be repaired with Silkcoat Interior Acrylic Putty. If the application surface has been leveled with gypsum plaster, Silkcoat Izolac should be applied before Metalico Soft. On old painted, dirty, or synthetic painted surfaces, Silkcoat Universal Primer should be used; on puttied surfaces, Silkcoat Putty Primer should be applied. As a base coat, Silkomatt in the same color as Metalico Soft is applied in a single coat. After the primer has dried, Metalico Soft is diluted with 5% water and applied using a roller or brush. After the first coat dries, apply the second coat using a roller or brush. Before full curing, create patterns using special effect tools (tampon, brush, spatula, chamois). After application, tools should be cleaned immediately with water. Before use, the paint must be mixed thoroughly until completely homogeneous. During application and drying, ambient and surface temperatures should be between +5°C and +35°C. For very glossy or glassy surfaces, lightly sand the surface beforehand to create a sound substrate and improve adhesion

Safety Warnings

S2: Keep out of reach of children. S24/25: Avoid contact with eyes and skin. S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

Storage

Can be stored for a minimum of 2 years in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened

Documents

Technical Data Sheet (TDS)

PDF

Material Safety Data Sheet (MSDS)

PDF
Need guidance?

Let's choose the right product for your project

Our technical team can advise you on surface type, application conditions and coverage.