Silkcoat
Silkcoat
1 / 6

Click an image to enlarge

Effect PaintsSand Pearl Texture

Palace

A decorative interior wall paint with a textured, pearlescent effect, based on a pure acrylic emulsion binder and containing pearlescent additives

Density
1.31 ± 0.02 g/ml
Consumption
3–4 m²/lt, 250–350 g/m² Solid Content: 60% ± 2
Thinning Ratio
Ready to use
Palace — Packaging
Packaging

10 kg and 3 kg PE buckets

Request a Quote

1 / 3

Application Video

How to Apply Silkcoat Palace

Watch the step-by-step professional application of the product.

Technical Data
Density
1.31 ± 0.02 g/ml
Consumption
3–4 m²/lt, 250–350 g/m² Solid Content: 60% ± 2
Thinning Ratio
Ready to use
Drying Time
Touch dry 15–20 min; dust-free after 1 hour; full cure after 24 hours
Features

Thanks to its pearlescent and matte-pearlescent structure, Palace offers a distinctive textured appearance and allows for various decorative pattern applications. Its water-based sandy structure and metallic look reflect a sense of coolness and magnificence onto your walls

Application Areas

Can be applied on all interior surfaces such as painted surfaces, concrete, plaster, rough plaster, betopan, glass-textured surfaces, and paintable wallpaper

Application Instructions

The application surface must be free from all dust, dirt, and oil. Blistered and old painted surfaces should be lightly leveled to obtain a clean, dry, and sound surface. If necessary, surface defects and cracks should be repaired with Silkcoat Interior Acrylic Putty. If the surface has been leveled with gypsum plaster, apply Silkcoat Izolac before Silkomatt. On old painted, dirty, or synthetic painted surfaces, use Silkcoat Universal Primer; on puttied surfaces, use Silkcoat Putty Primer. Silkomatt, in the same color as Palace, is applied as a single base coat.Silkcoat Palace is applied by taking a small amount of product with the tip of a brush and applying it using the brush according to the desired pattern. As the product begins to dry, lightly press a clean, thick brush over the sand texture to remove excess liquid. This process leaves the sand with a matte appearance while the underlying surface gains a glossy look Tools must be cleaned immediately after application. Before use, the paint must be mixed thoroughly until completely homogeneous. During application and drying, ambient and surface temperatures should be between +5°C and +35°C. For very glossy or glassy surfaces, the surface should be leveled beforehand to ensure better adhesion

Safety Warnings

S2: Keep out of reach of children.S24/25: Avoid contact with eyes and skin.S46: If swallowed, seek medical advice immediately and show the container or label. Store the product in a tightly closed container. Do not dispose of into drains

Storage

Can be stored for a minimum of 2 years in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened

Documents

Technical Data Sheet (TDS)

PDF

Material Safety Data Sheet (MSDS)

PDF

Our Color Charts

Palace
Need guidance?

Let's choose the right product for your project

Our technical team can advise you on surface type, application conditions and coverage.