İpek Sıva Series (Elegant)

Contributing to heat and sound insulation, the Elegant Series Silk Plaster is anti-static and dust-repellent. Besides being easy to apply, its water-based structure is harmless to human health and the environment. It is odorless and breathable

Can be applied to fine plaster, gypsum plaster, plasterboard, wooden and non-alkaline surfaces. Not applied to glass, brick, metal surfaces, exteriors or wet substrates

The surface must be cleaned of all dust, dirt and oil. After lightly sanding blistered and old painted surfaces, obtain a clean, dry and sound surface. Apply Silkcoat Primer first to newly plastered surfaces. On old painted, dirty or damp surfaces, clean residues thoroughly; apply Silkcoat Primer after SX 2000 Varnish. Once the primer dries, silk plaster application can begin. Empty the bag contents into a container with about 6 L of water and knead thoroughly; more water may be added if needed. After resting for at least 20 minutes, apply with a plastic trowel at an average thickness of 1 mm. Clean tools immediately with water. In areas with high deformation, adding one glass of Silkcoat SX 2000 varnish per bag is recommended. Do not leave the surface half-finished. Can be applied by plastic trowel or spray gun. On newly plastered surfaces, wait at least 28 days. Ambient and surface temperatures should be between +5°C and +35°C

Store the product in a tightly closed container. Do not dispose of into drains

Can be stored for a minimum of 1 year in a cool, clean, and dry environment, protected from direct sunlight, provided the container remains unopened