Velvet Effect Paint: Soft-Textured Walls with Velvetto

Short answer: Velvet effect paint is a decorative interior paint that gives walls a soft texture reminiscent of velvet fabric, shifting between semi-gloss and matt. Silkcoat Velvetto is a pure acrylic velvet effect paint with pearlescent additives; it is rolled onto a Silkomatt base coat and, before it fully dries, patterned with a special trowel in circular motions.

What is velvet effect paint?

Velvet effect paint is a decorative paint that creates a soft look, catching the light in some places and staying matt in others depending on the viewing angle. It gives a wall the depth of woven fabric and creates a warmer atmosphere than flat paint.

• Look: Pearl-like, velvety transitions between semi-gloss and matt.
• Pattern: A velvet texture created with a special trowel in circular motions; other pattern techniques are possible too.
• Composition: Velvetto is pure acrylic, water-based and contains pearlescent additives; it is designed for interiors.

What is the difference between Velvetto and Velvetto Soft?

Both belong to the pearlescent, velvet-patterned range of the Silkcoat Efects line; Velvetto Soft gives a softer velvet look. The technical data listed on silkcoat.com is as follows:

	Velvetto	Velvetto Soft
Texture	Velvet texture	Soft velvet
Composition	Pure acrylic, pearlescent additives, water-based	Pure acrylic, pearlescent additives, water-based
Thinning	Ready to use	Ready to use
Coverage	3,5-4 m²/lt (250-350 g/m²)	3,5-4 m²/lt (250-350 g/m²)
Drying	Touch dry 30-45 min, dust-free 1 hour, fully dry 24 hours	Touch dry 30-45 min, dust-free 1 hour, fully dry 24 hours
Packaging	10 kg, 3 kg	10 kg, 3 kg

• Velvetto: A velvet-patterned range with a lustrous finish for lively, vibrant spaces.
• Velvetto Soft: A softer velvet effect using the same application method.

How do you apply velvet effect paint?

Velvet effect paint is applied in two coats over a primed surface that has been tinted with Silkomatt; each coat is patterned in circles with a special trowel before it dries. Following Silkcoat's Velvetto application instructions:

1. Prepare the surface: Clean off all dust, dirt and grease, and lightly sand any blistered or previously painted surfaces all over. Repair defects and cracks with Akrilik Macun.
2. Prime: Use Silkcoat İzolac on surfaces levelled with gypsum plaster, Universal Astar on old, dirty or solvent-based painted surfaces, and Silkcoat Macun Astarı on filled surfaces.
3. Apply the base colour: As the final base coat, apply a single coat of Silkomatt in the Velvetto shade.
4. First coat: Roll Velvetto onto the surface. Before it fully dries, create the pattern with a special trowel using circular motions. Leave it to dry for 4-6 hours, depending on conditions.
5. Second coat: Once the first coat is dry, apply Velvetto in a thin layer with a decorative trowel or roller, then pattern it in circles with the special trowel before it dries.
6. Clean your tools: Wash tools with water straight after application.

Stir the paint until smooth and uniform before use, and keep the room and surface temperature between +5 °C and +35 °C throughout application and drying. Very glossy or glass-like surfaces should be sanded first.

How long does velvet effect paint take to dry?

Velvetto and Velvetto Soft are fully dry in 24 hours. They are touch dry in 30-45 minutes and dust-free after 1 hour. Allow 4-6 hours between coats, depending on conditions.

Where can you use velvet effect paint?

Velvetto can be applied to properly prepared interior surfaces such as previously painted walls, concrete, plaster, cement render, cement board, glass-fibre wallcovering and paintable wallpaper. Its soft texture really shines in these spaces:

• Bedroom: A warm, fabric-like finish on the wall behind the bed.
• Living room and lounge: Velvety transitions that gain depth in the evening light.
• Cafés, hotels and boutiques: A feature wall for a lively, inviting atmosphere.
• Children's and teens' rooms: Its water-based formula is safe for people and the environment.

If you want a glossier, pearl-effect finish, take a look at our guide to pearlescent paint. For a similar semi-gloss velvety look, Cashmere is another option.

Conclusion

• Velvet effect paint gives walls a soft, fabric-like texture that shifts between semi-gloss and matt.
• Velvetto is applied in two coats over a Silkomatt base in the Velvetto shade, with each coat patterned in circles using a special trowel.
• It is ready to use, covers 3,5-4 m²/lt and is fully dry in 24 hours.
• For help choosing colours and products, get in touch with us; you can find every option on our effect paints page.