Colour Changing Wall Paint: Walls That Shift With the Angle Using Magico
What is colour changing wall paint? Magico creates waves of colour with light and viewing angle. Technical data, application and where to use it.
Short answer: Colour changing wall paint is a decorative interior paint that shows different shades depending on the light and the viewing angle. Silkcoat Magico is a water-based, colour changing effect paint based on a pure acrylic binder; it creates waves of colour on the wall that respond to light and movement, giving a room a dynamic, lively look.
What is colour changing wall paint?
Colour changing wall paint is an effect paint that, instead of a single flat colour, shows shades that shift with the direction of the light and the position of the viewer. As you walk through the room, or as the light changes during the day, the wall displays a different wave of colour. The key features of Magico highlighted on silkcoat.com are:
- Colour waves: Colours that change with light and movement, for a dynamic, lively space.
- Colour combinations: Allows different colour combinations at the same time.
- Freedom of pattern: Lends itself to a variety of pattern applications.
- Washability: Highly washable; according to Silkcoat, its water-based formula is harmless to human health and the environment.
What are Magico's technical specifications?
Magico is ready to use, covers 6-8 m²/lt, is touch dry in 15-20 minutes and fully dry in 24 hours. The technical data on silkcoat.com is as follows:
| Property | Magico |
|---|---|
| Composition | Pure acrylic |
| Density | 1.03 ± 0.02 g/ml |
| Consumption | 6-8 m²/lt (125-170 g/m²) |
| Thinning | Ready to use |
| Drying | Touch dry 15-20 min, dust free 1 hour, fully dry 24 hours |
| Application temperature | Ambient and surface between +5 °C and +35 °C |
| Packaging | 10 kg, 3 kg, 1 kg plastic buckets |
| Storage | At least 2 years unopened, in a cool, clean, dry place away from sunlight |
How do you apply colour changing wall paint?
Success with Magico depends on surface preparation: the surface must be clean, dry and sound, the paint must be stirred until homogeneous, and it must be applied at the right temperature. The general rules from Silkcoat's Magico page:
- Clean the surface: Remove all dust, dirt and grease from the surface to be painted.
- Make the substrate sound: Lightly smooth down blistered and previously painted surfaces; repair defects and cracks with Akrilik Macun.
- Stir the paint: Magico is ready to use and should not be thinned; stir it until completely homogeneous before use.
- Watch the temperature: Ambient and surface temperature must stay between +5 °C and +35 °C throughout application and drying.
- Prepare glossy surfaces: On very glossy or glass-like surfaces, smooth the surface first to create a sound base for better adhesion.
The pattern technique and the choice of base colour determine the colour effect you get; before you start, we recommend getting in touch with Silkcoat to settle on the right method for your project.
Where is colour changing wall paint used?
Magico can be applied to prepared interior surfaces such as previously painted walls, concrete, gypsum plaster, cement render, cement board, glass fibre wallcovering and paintable wallpaper. Its light-responsive effect stands out most in these spaces:
- Living room feature wall: A focal point that changes as daylight gives way to evening lighting.
- Hallways and entrances: Colours that shift with the angle as you walk heighten the sense of movement.
- Hotels, restaurants and cafés: A dynamic interior that catches guests' attention.
- Shops and showrooms: A memorable backdrop that comes alive under spotlights.
How is Magico different from other pearlescent effect paints?
What sets Magico apart is its colour changing nature: pearlescent paints shimmer in the light, whereas Magico creates waves of colour in response to light and movement. A quick comparison:
| Product | Signature look |
|---|---|
| Magico | Colour changing decorative effect |
| Metalico | Metallic pearlescent |
| Pearl | Pearlescent texture, pearl-like look |
| Palace | Sand-textured pearlescent |
You can read more about how light-play surfaces work in our article on pearlescent paint, and find effect paint concepts explained in our glossary of effect paint terms.
Conclusion
- Colour changing wall paint brings movement to a wall by showing different shades depending on the light and the viewing angle.
- Magico is pure acrylic, water-based and ready to use; it covers 6-8 m²/lt, is touch dry in 15-20 minutes and fully dry in 24 hours.
- A clean, dry, sound substrate and a temperature between +5 °C and +35 °C are the foundation of a good result.
- For colour and application advice, get in touch with us; all options are on our effect paints page.
Magico's colour changing nature creates waves of colour in response to light and movement, so the wall appears in different shades depending on the direction of the light and the angle you view it from.
No. Magico is ready to use; it only needs to be stirred until completely homogeneous before application.
According to Silkcoat's technical data, Magico's consumption is 6-8 m²/lt, or 125-170 g/m².
Yes. According to Silkcoat, Magico is highly washable.